How BATTSAVER works
1. Captures solar energy
The solar panel captures daylight.
2. Converts it into safe electrical energy
That energy becomes a stable, controlled charge.
3. Keeps the battery active
The energy is sent to the battery to maintain its charge level and prevent deterioration.
How to install BATTSAVER on your vehicle
Find everything you need to install BATTSAVER and start protecting your vehicle's battery in minutes.
Portable mode
Occasional use or multiple vehicles with quick-connect clamps
Connect the clamps: Clamp firmly onto the battery terminals: Red clamp to Positive (+) and Black clamp to Negative (-).
Panel placement: Put the panel in the sun. Mount it outside with the magnets, or inside on the glass with the suction cups.
Central connection: Join the panel and the clamps by connecting both ends to the central cable.
Before starting: Remove the clamps and store the BATTSAVER before closing the hood and starting the engine.
Fixed mode
Fixed connection to the terminal bolts so you can drive without disconnecting
Attach the terminals: Fasten the copper terminals to the battery bolts: Red cable to Positive (+) and Black cable to Negative (-).
Panel placement: Put the panel in the sun. Mount it outside with the magnets, or inside on the glass with the suction cups.
Fixed connection: Join the panel and the battery by connecting both ends to the central cable.
Continuous driving: No need to disconnect! You can start and drive your vehicle safely with the BATTSAVER installed.
Indicator lights
Know the status of your BATTSAVER at all times.
🔵 Blue light
Good sun exposure.
🔴 Red light
Battery charging.
🟢 Green light
Battery charged.
🟡 Yellow light
Correct connection.
How to read the indicators
The indicator lights tell you the status of your BATTSAVER and the battery.
🔵 Blue light: The panel is receiving light; the battery is not connected yet.
🔴 Red light: Correct connection and panel receiving light.
🟢 Green light: The device stops supplying energy.
🟡 Yellow light: Correct connection, no short circuits or reversed cables.
For your BATTSAVER to work properly:
Do not modify it or use it if it shows any damage. When installing, make sure to connect positive to positive and negative to negative. This protects both the device and the battery. If you use it in commercial or industrial applications, always follow the applicable safety standards.
About maintaining your BATTSAVER
This product requires no special maintenance other than occasional cleaning and replacing damaged or worn parts.
Clean the solar panel, battery clamps and other components to remove dust or debris before the next use. Use a slightly damp cloth.
Do not use soap, solvents or chemicals, and do not apply them directly to the solar panel.
Dry all components thoroughly to prevent moisture buildup that could corrode the electrical connections.
When not in use, store the BATTSAVER in a dry, safe place.
Energy from sunrise to sunset
Battery at 100%, your vehicle always on the move
Keep your vehicle's battery always active with solar energy. Find the right device for you:
